4H0 498 625
Front axle wheel hub bearing unit (also fitted at the rear axle on four-wheel-drive variants) — Audi A4 / A4L (B8), A5 and S5, A6L (C7), A7, A8L (D4 / 4H), Q5, and Porsche Macan (95B)
4H0 498 625 is an OE wheel hub bearing reference. Qdyanshuo supplies the direct replacement under our own number QY-1043, made by our IATF 16949 certified manufacturing partner, with a quote target within 24 hours.
The 4H0 498 625 suffix variants
On VAG platforms the trailing letter is a revision index, not a different part family. This is what we hold on file for this application.
| Reference | Status | Qdyanshuo part |
|---|---|---|
| 4H0 498 625 | On file — direct replacement | QY-1043 |
| 4H0 498 625 D | Not in our interchange file — send the stamped number to confirm | — |
| 4H0 498 625 E | Not in our interchange file — send the stamped number to confirm | — |
| 4H0 498 625 F | Not in our interchange file — send the stamped number to confirm | — |
We hold 4H0 498 625 against QY-1043. 4H0 498 625 D and 4H0 498 625 E and 4H0 498 625 F are later revision indices of the same reference block; we do not carry them in our interchange file, so send a photo of the number stamped on the old part and we will confirm the correct replacement before quoting.
What the unit looks like
Flange, bolt circle and the ABS encoder ring are the three features to check against your old part before you order against 4H0 498 625.
Vehicles this reference is listed for
Fitment is for identification. Confirm the number stamped on the existing part before ordering.
| Vehicle / position / year |
|---|
| Front-Audi A5 (2007/06-) |
| Front-Audi A7 (2011/06-) |
| Rear-Audi A7 (2011/06-) Four wheel drive |
| Front/Rear-Audi A8L (D4/4H) (2011/01-) |
| Front-Audi S5 (2007/06-2017/01) |
| Front-FAW-Audi A4L B8 (2009/02-2016/08) |
| Rear-FAW AudiA4L (B8)(2009/02-2016/08) Four-Wheel drive |
| Front-FAW-Audi A6L(C7) (2012/03-) |
| Rear-FAW-Audi A6L(C7) (2012/03-) Four-wheel drive |
| Front/Rear-FAW-AudiQ5 (2010/03-) |
| Front/Rear-Porsche Macan (2014/02-) 95B |
Every reference that maps to the same part
Aftermarket and OE trademarks remain the property of their respective owners. These numbers are shown for identification only.
| Brand | Reference | Qdyanshuo part |
|---|---|---|
| OE | 4G0-598-611 | QY-1043 |
| OE | 4G0598611 | QY-1043 |
| OE | 4H0 498 625 | QY-1043 |
| OE | 4H0498625 | QY-1043 |
| OE | A4H0498625A | QY-1043 |
| OE | 8K0 407 625 B | QY-1043 |
| OE | 8K0407625B | QY-1043 |
| OE | 8K0 407 625 P | QY-1043 |
| OE | 8K0407625P | QY-1043 |
| OE | 8K0 598 625 | QY-1043 |
| OE | 8K0598625 | QY-1043 |
| OE | 8KD 407 625 B | QY-1043 |
| OE | 8KD407625B | QY-1043 |
| OE | 8KD 407 625B | QY-1043 |
Full product page for 4H0498625A · Search all 225 references
What is specified before the part leaves the plant.
Material and inspection facts are stated with their standards so a buyer can evaluate the manufacturing basis without relying on vague quality claims.
Forging steel
Jiangyin Xingcheng Special Steel, GB/T699-2015 55#. The steelmaker also supplies SKF, FAG and NSK.
Steel balls
G10 grade steel balls supplied by Tsubaki Nakajima, Japan.
Grease
KYODO YUSHI AF-1 grease supplied from Japan.
Inspection
100% ABS sensor testing, clearance inspection, vibration measurement and third-party bench testing.
Questions buyers ask about 4H0 498 625
What is the direct replacement for 4H0 498 625?
4H0 498 625 is replaced by Qdyanshuo QY-1043, catalogued under master reference 4H0498625A. Outer diameter 102 mm, width 40.2 mm, packed 15 pieces per carton. Minimum order 100 pieces per part number.
Which vehicles use 4H0 498 625?
This reference is listed for: Front-Audi A5 (2007/06-); Front-Audi A7 (2011/06-); Rear-Audi A7 (2011/06-) Four wheel drive; Front/Rear-Audi A8L (D4/4H) (2011/01-); Front-Audi S5 (2007/06-2017/01); Front-FAW-Audi A4L B8 (2009/02-2016/08); Rear-FAW AudiA4L (B8)(2009/02-2016/08) Four-Wheel drive; Front-FAW-Audi A6L(C7) (2012/03-); Rear-FAW-Audi A6L(C7) (2012/03-) Four-wheel drive; Front/Rear-FAW-AudiQ5 (2010/03-); Front/Rear-Porsche Macan (2014/02-) 95B. Fitment is for identification — confirm the number stamped on the existing part before ordering.
Are 4H0 498 625 D and 4H0 498 625 E and 4H0 498 625 F the same part as 4H0 498 625?
On VAG references the trailing letter is a revision index rather than a different part family. Our interchange file lists 4H0 498 625 against QY-1043; 4H0 498 625 D and 4H0 498 625 E and 4H0 498 625 F are not in that file. Send the number stamped on your old part and we will confirm the correct replacement before quoting.
What quantity and lead time apply to 4H0 498 625?
Minimum order is 100 pieces per part number for stock references, packed 15 pieces per carton. Stock references ship in days; made-to-order items are typically 30–45 days ex-works. Qdyanshuo quotes within 24 hours.
Need a price on 4H0 498 625?
Fill in three lines and we quote CIF against this exact part number, within 24 hours. Minimum order 100 pcs per part number.
Why buy this reference from us
Where the steel comes from
Races are forged from Xingcheng Special Steel — the same mill that supplies SKF, FAG and NSK. Balls are G10 grade from Tsubaki Nakajima, Japan.
Certification
Our manufacturing partner holds IATF 16949:2018, ISO 45001:2018 and ISO 14001:2015, and has built bearings since 1958.
Not sure this is the right reference?
Send the number stamped on the old part, or the aftermarket reference you buy today, and we will confirm the direct replacement.